Nate Campany & The Serenade - The Only Bridge I Need
 
 
 Modules
110 VCO/VCF/VCA
111* VCO/VCF
112 Dual VCO
120* VCF/VCA
121 Dual VCF
130 Dual VCA
131 Output mixer/oscillator/Headphone Amp
132 Dual CV/Audio Mixer & Voltage Processor
140 Dual EG & LFO
141* Dual Envelope/Gate Delay/Inverter-Adder
150 Ring Mod/Noise/S&H/LFO
160* Computer Interface
165 Dual Portamento Controller
170* Pitch to Voltage converter/Envelope Follower/Amp
172 Audio Delay/Phaser/LFO/Gate Delay
173 Signal Gate & Multiple Jacks
174 Parametric EQ
180 32-key Controller Keyboard
181 49-key Controller Keyboard
182 Analogue Sequencer
184 4-note Polyphonic Keyboard
190 Three-Module Rack
191J Five-Module Rack
*Believed to have been prototypes only
 Downloads
 Links

"This voltage controlled synthesizer is a musical instrument which contains elements that can be connected together, much like building blocks to build or create almost any sound imaginable. As with most professional systems, the System lOOM puts these synthesizer elements into separate modules so that you can build a system which meets your own particular needs. All major control and audio inputs for each module have their own input mixers which greatly simplifies patches where multiple inputs are needed. This also means that all patch cord signal levels are high for a much better signal-tonoise ratio. All module inputs and outputs are compatible so that any output may be connected with any other and with most equipment found in the recording studio. Keyboard control voltage, gate and trigger are internally connected so that normally patch cords are not needed for these. All modules are the same size and weight: 104(W) x 230(H) x 200CD)mm, 1.6kg."

"A Flexible System for Today's Creative Musician The System 100m is sold as separate units so that you can build up a system to match your own particular needs. The keyboards include 6-conductor cords for power, internal CV, GATE, and TRIGGER connections to the system. The racks (190 and 191) contain the power supply, power switch, and voltage regulators for the modules and keyboard. Module mounting screws and a patch cord set (PCS-2) are included."

Tech Specs
  • 100m modules are 230mm high by 104mm wide.
  • Modules require +/- 15v and 22v DC power supply.
  • Patch connections are 3.5mm mono phone jack.
  • Rear module power (& control) connections are 8-pin DIN. Details here.
  • Inter-rack (rear) and & keyboard (front) connections are 6-pin DIN. Details here.
 
 For sale

The following parts are for sale. These were purchased these some time ago from a former Roland dealer in Australia.

All PCB's appear to be complete but have not been tested. It might be safest to assume these are swap-outs for repaired or returned modules and will most likely require more work than simply connecting up.

These would be better sold as a whole lot but will entertain offers for individual parts.
Contact us here with your offers .

  • 4 x 130 Dual VCA complete PCB's ALL SOLD
  • 3 x 121 Dual VCF complete PCB's ALL SOLD
  • 1 x 112 Dual VCO complete PCB SOLD
  • 1 x 110 VCO/VCF/VCA complete PCB SOLD
     
  • 2 x 112 front panels SOLD
  • 1 x 121 front panel SOLD
ALSO: sinoptyk@libero.it has 3 system 100m modules for sale: 112 121 132

Do you have Roland 100m modules to sell or trade? If so please do get in touch!!

 Gallery
ftgRoland100m_thumb.jpg


Turnkey Basement   Hans Zimmers Beauty   the ftg 100m
 Egroup
Join in the discussion and sign up to the egroup to stay updated.
 

www.analoghell.com © 1995 - 2010 analog hell / far too good

[38.107.191.107]